Lace Single SAL

Lace Single SAL
Originally uploaded by Project Pictures

I've been going through Ravelry and "cleaning house". That means looking at what groups I read and don't read, where I post often, occasionally, or never and then reordering the active ones to the "front" and dropping those I don't really use. I usually end up picking up one or two new ones right before I clean up, because they need to get sorted in amongst the rest and that triggers the whole thing.

One of the boards I added recently was "Spinner Central". This is a group for hand-spinners that work on any tool--wheel or spindle. I enjoyed looking through the more general topics that can be applied to anything. It also has a quarterly SAL/KAL (that's a Spin-a-Long/Knit-a-Long) and we all know I'm a sucker for this sort of thing. I enjoy getting pushed to try new things, and any excuse to post what I'm working on is great!

The SAL this time around is "lace-weight singles". I'm not much of a singles person. I've bought some, commercially made, and spun them once or twice. But in general I love a tightly-plied yarn.

I was in-between projects, and it probably didn't hurt that I enjoyed a beer with my pizza for dinner and as the kids were safely tucked away in bed, suddenly spinning a lace-weight single yarn seemed really interesting. And here I have all these great samples to play with that I had no clue how to use!

In specific I had a grab-bag of "exotics" from A Verb for Keeping Warm that I had purchased as part of my Sock Summit '09 loot. Dreamy stuff. Soft. Beautiful colors, all natural or naturally-dyed. I picked three that looked like they might go well together. At "noon", "one" and "two o'clock" there is grey, red, and brown fiber. I wasn't sure what they were, but they were lovely and I thought they'd blend well together.

I started with the silver/gray fiber. Oh, it was soft and smooth and started spinning so easily. About half way through I broke off a few sections of it, and some of the brown fiber, and carefully blended them together in increasing amounts of brown. I hoped this would blend one into the next in a slow gradient. I'm not sure how successful it was, but it's still pretty. And of course next was the chocolate brown and just like the silver it was smooth and wonderful.

But when I got to the red/brown fiber, I started to have trouble. It's quite soft, too, but with a much less silky hand. The staple was much shorter and it seemed slightly "sticky". The fibers wanted to grab each other, rather than slide easily. I struggled with blending the deep brown into the red, but managed to get that far. But my single kept being difficult to manage. I'd draft it apart without warning, or get slubs.

Rather than drive myself crazy, I pulled out my hand cards and re-carded this last roving. I was hoping it would open up the fibers and make them easier to draft, and it did help. But I still had trouble keeping it moving smoothly. I tried some of it on my supported spindle, but it was to grabby to long-draw well. In addition, I noticed as I worked under bright light that when I did draft through a grabby section, there were wisps of "smoke" drifting upwards from the fiber... ACK. It was DIRT.

I pressed on and finished spinning, but with a sad feeling for the state of this fiber. Especially when the first two were so lovely.

After, I went to the "A Verb for Keeping Warm" Ravelry group and posted a plea to help me figure out what the fibers were. I guessed the samples I had spun were gray alpaca, brown alpaca and merino/yak blend, and wouldn't you know it but THE OWNER replied and helped me out. She ventured that I had:

12 o’clock - 100% baby alpaca - silver
1 o’clock - 50% yak / 50% merino
3 o’clock - 100% baby alpaca - brown
6 o’clock - 100% cashmere
8 o’clock - pretty sure it’s 50% camel / 50% silk
10 o’clock - pretty sure it’s 50% merino / 50% silk

Looks like I did a good job guessing!

I'm happy/disappointed with the merino/yak. My bits and samples of this from trying various methods on spinning it yielded yarn that is positively to die for. It's soft and cuddly, springy, and vibrant. But spinning it was a total pain. I might have to try some more to find out if it was the sample, or characteristic of the blend, because I want more of this yarn.

The lace single came out in the end. It's so incredibly soft I want to carry it around and make people pet it. I think I'll be making a Revontuli (pdf link) in a scarf-size out of it. This is another yarn that is going to have to wait for the idea to grab me and say "YES, THIS IS IT!!"

What to do with a yarn

Pygora / Merino / Silk
Originally uploaded by Project Pictures

And.. I'm done! It didn't take nearly as long to spin as I might have liked (because spinning this blend was glorious!). The blend was lovely to touch and spun out super-fine.

I've come to a point where for most things I spin with a purpose in mind. I buy a fiber for a project and attempt to spin it to specifications that would allow me to knit the intended object, or at the very least I figure out what I want to knit before I start spinning an impulse fiber purchase. But other times I fall in love with a sample because of its color or texture and can't help myself but splurge. These things tend to get spun up however I'm feeling at the time with no real plan. It's a lot of fun but the down-side is that I'm likely to end up with a very small amount of yarn that is lovely, but I have no way of making or getting more!

With this yarn I had a brief moment where I debated whether to put it together as a 2-ply or a 3-ply. I love 3-ply. It's round and shows stitches wonderfully. It also eats up a lot more of your precious spinning. For example I could have had around 200 yards of 2-ply lace. But 200 yards of lace is difficult to apply to a project. I'd like at least twice that to make it worth the effort of knitting up.

On the other hand, 3-ply reduces the yardage to 140 yards and that can be just as difficult to purpose. Still, I like that more and it's enough for fingerless mittens, or a neck-warming type cowl.. or Spiraluscious by Anne Hanson which just happens to be a pattern I've had in my queue since I first saw it.

I'm still debating. I have a lovely periwinkle dye that I think would be beautiful on this yarn, but the natural color glows and it's difficult to want to cover that up. I'm letting the idea percolate a little bit while I finish up all the other things I'm working on. I'm sure the right match will occur to me, eventually!

Hand-carded Pygora blend

Hand-carded Pygora blend
Originally uploaded by Project Pictures

It's so much easier to blog each day when you get ahead of yourself! I don't mind letting you in on a little secret--I'm writing several posts all at once and then letting them play out over time ;) I hope that's okay!

This lovely little bit of fluff is pygora. But it's not just pygora. I have delved once again into blending with my hand-cards and made a series of batts that blend soft cream pygora with white merino/silk top. You may remember the half-ounce I picked up at Stitches Midwest. This type B pygora (which means it's a blend of cashmere-type coat and very soft mohair-type) was too tempting to pass up. But what to do with 1/2 ounce?

I have been stretching it in this blend. I added enough merino/silk to bring it to a full ounce. I then carded a series of batts with each fiber in it, stacked them and pulled of sections that included all the previous batts and re-carded that. And then did it again. And one more time. I really wanted a smooth, complete blend.

The pygora was a little disappointing. I was very surprised when I pulled it out of its package to find that the ends of the batt that had been tucked into the middle were matted together. I had a very hard time pulling it apart. While carding, I found that the fiber isn't particularly uniform and has quite a bit of tiny neps in it. Some sections spin out into extremely uniform thread, but I often happen into an area that is harder to draft, or has these tangles of fiber that just want to stick together.

It is deliciously soft. It is hard not to just stop and pet the carded batts and enjoy it unspun. It also has a lovely luster. I'm hoping the finished lace-weight yarn will make a very nice scarf or neck-warmer. I'll have to decide when I'm done whether or not I'll dye the lot of it a color, or leave it in its natural off-white.

SKA September 2009 - Nancy Bush Mystery Socks

SKA September 2009 - Nancy Bush Mystery Socks
Originally uploaded by Project Pictures

I'm a bit behind. These socks have been done for a couple of weeks but I've been diligently getting all the fiber blog posts up for the Phat Fiber box. It has been fun detailing each sample in the series.

September kicked off the Sock Knitters Anonymous "Sockdown" season. This group on Ravelry is dedicated to stretching sock knitters to their limits, challenging each month with a different theme.

Our first challenge is the only one of the year to focus on a color, rather than a knitting skill. The requirements were to either a) knit a sock in yellow (solid or semi-solid only) or b) knit a sock designed by Wendy Johnson. Option C was the "Mystery Sock", and it falls under the first heading and was required to be knit in yellow.

I bought String Theory's yellow sock yarn called "Caper". I didn't have any pure yellow in my stash. Of course you can always knit any sock any way you want... but there are prizes involved and that tiny, little competitive urge that I have from time to time started nagging. I just couldn't participate in the group and NOT knit a project that qualified for the prize drawing. I don't expect to win anything (except a beautiful pair of socks).

Nancy Bush did this Mystery design and it's lovely. The final name is "Fox Faces". With a little imagination you can see them peering at you in the picture.

The challenge for me is to knit a Mystery Sock with complete faith in the designer. I followed every instruction that I could, and in a couple of places figured out much later I'd done it a little bit wrong. But that's okay, too. I learned an Estonian cast on (very pretty) and what Nancy Bush calls a "vikkel braid", which really just means a sideways braid. The back of the calf is knit in ribbing, but not all the way to the ankle. I don't like that, but I'm rolling with the pattern here.

The heels I did end up needing to change and probably could have done more to them. I knit the heel flap about twice as long and thus doubled the gusset as well. I probably needed to do more, but I'm not ripping out to do these again. The Dutch heel is very pretty and easy to make. I might use it again in another sock. It fits well, but I do need it to be a lot deeper to accommodate my high instep.

I slipped up and didn't switch to stockinette two inches before the toes, but I don't think it hurts to have the lace all the way down. That was entirely a "woops" moment and not me tinkering with the aesthetics of the pattern. I simply didn't pull it out to consult while I was knitting and tried to do things from memory.

The yarn has a touch of cashmere in it and the yellow is really lovely. It is so nice to do something like this on faith and have it come out so well. I may even do the mystery sock in November!

Jacob wool

Jacob wool
Originally uploaded by Project Pictures

As if I needed further confirmation that my default spinning thickness isn't lace... I played around with the Jacob fleece I was gifted last Spring.

This is a beautiful fleece. For Jacob (which is an unimproved breed and the wool much more robust than fine) this is a very nice and soft fleece! Jacob has both white and dark sections and this is obviously from the black. It is BEAUTIFUL.

Because I hardly did a perfect job separating the two colors, there are a few strands of white here-and-there throughout the roving. It gives the yarn a very nice character. Spinning "reasonably thin" and then chain-plying the yarn yielded a bouncy yarn with a lot of character. It swatches at 6 stitches per inch, which is Sport weight on the chart I have.

The best part was taking this swatch into the owner. She rescued her two Jacob sheep and was originally fairly apprehensive about having done so. But she loves them now and the excitement in seeing the fleece actually used is just wonderful.

I can't wait to make something really special.

October Spindler's Challenge

October Spindler's Challenge
Originally uploaded by Project Pictures

I've had this yarn spun for a while now, but the blogging took back seat to getting all the Phat Fiber Box samples finished up. They were addicting while they lasted! But now we have our monthly Spindler's challenge.

I often try to sneak the Spindler's Challenge in as some other fiber-project I'm doing for another reason. That works out well enough, but sometimes it just feels like a cheat not to give the challenge its own attention. I like to stretch myself by trying out some new technique each month for the Challenge spinning, because that puts my own little twist on it. Har. Har. This month I decided to go back to that personal promise.

October's theme is "Stained Glass". I love stained glass. I love the light pouring through it. When looking for a new church, I've gone back to buildings where I didn't feel immediately that I fit in, just because I like to sit under the glorious play of color there. There is one window in particular in my home-town church that portrays Jesus's last night in the garden of Gesthemane. Not only is this a compelling story on its own, but the glass is beautifully done. On a sunny day, the blues and purples glow, with golden light shining down through them both figuratively and literally. I loved it so much that I required our photographer to get one picture of me in front of it on my wedding day.

I had plenty of bits of roving that caught these colors individually, but I wanted to have a more subtle variation like the play of light through the glass. I've also been reading lately about blending colors through the use of hand cards. So I thought I would tackle a whole bunch of different ideas at the same time.

The first thing I did was divide the roving into lots of small pieces. I jumbled these up and then picked out a few at a time and loaded them onto my student hand cards (which I still have from my very first spinning class about four years ago). I transferred all the loaded fibers from one paddle to the other. This does a couple of things. Commercially combed top is a preparation of fiber where everything is lined up parallel, and is rather compact. Carded batts jumble all the fibers together, criss-crossing in a lot of places. It also allows a lot of air in between everything. A batt is fluffy. I pulled the fibers off and carded them again until I had an even batt on one carder, and then carefully pulled that off and rolled it up for safe-keeping.

Then I spun these batts. My second challenge to myself lately has been to spin long-draw. I'm a pretty self-controlling person and short-draw suits that style much better. You always have control over the fiber when spinning with a short-draw. With long-draw, you have to back off a bit and trust the twist and friction to do their job, too. As you get better at it, it's pretty fascinating to watch the twist grab just the right amount of fiber and pull it into the growing strand. You have to let just enough more twist in to keep that going. Too much, and you get a sudden thick spot in your spinning. Too little and it all falls apart.

But once you get the rhythm down, long draw is fast. I couldn't believe how quickly I got through all the batts (although I suppose I shouldn't be shocked as I had a little under an ounce to work with). Winding off an plying took almost no time at all and I was left with around 53 yards of 3-ply yarn. It's lovely and fluffy and I'm really pleased with the play of color throughout. I think I'll probably combine it with some of the merino samples I spun earlier this year for a gift.

Cormo, Romeldale, Qiviut blend

Cormo, Romeldale, Qiviut blend
Originally uploaded by Project Pictures

So, on a lark, my daughter and I hopped in the car on a particular Sunday and drove an hour-and-a-half up to Canby, Oregon to attend the Oregon Flock and Fiber Festival (otherwise known as OFFF). Just like the Black Sheep Gathering in Eugene, this is a great opportunity to get some neat wool and products from other independent retailers.

As I looked through the Bellwether Wool booth (while simultaneously making a fool of myself for confusing them with Ask the Bellwether.. I'd chalk it up to lack-of-sleep but it was really just plain DUH-ness) I pulled out a small roll of fiber. It was labeled "Cormo, Romeldale, and Qiviut" and was $6 for one ounce.

Now, I can get undyed Merino for $1.50/ounce. But qiviut can be found for anywhere between $45-$75 per ounce. You could SHAKE a batt of qiviut at any other roving, and the price would go up. So I didn't really even turn an eyelash at the price.

Lois Olund (who had apparently forgiven me for my moment of idiocy) came over and explained that they had acquired an entire musk ox pelt from a friend in Alaska. And realizing what they had, they sat down with it on the floor and combed the qiviut out of it. What I had in my hand was a result of this labor.

Now how could I resist a story like that? I took the roll home with me. Just one ounce, I reasoned, would be plenty to play with and enough to get lace-weight out of for a cowl.

I stopped and grabbed up my copy of In Sheep's Clothing to read up on Cormo and Romeldale. Cormo, it turns out, is an Australian cross of Corriedale rams with Merino ewes-- so it's a bit more hardy than a Merino, but with tons of crimp just like its momma's wool. It's not quite Merino soft, but still is very soft. Romeldale is another hardier cross, using Rambouillet (named for the place where King Louis XVI established a flock of Spanish Merinos) ewes and Romney rams. Basically what this means is there is a blend of wool that is very close to Merino, but perhaps just a touch more sturdy... with a nice pinch of ultra-soft-and-fine-qiviut blended in.

YUM.

I took off spinning this with a careful long-draw, thinking I'd get two-ply lace out of it. It would be PERFECT for the recently released Pretty Thing (thank you Yarn Harlot!! I've been waiting on that since February). My sample was a nice lace-weight, but what I forget is that when I start having fun, my default is closer to two-ply fingering or even sport.

I enjoyed myself immensely, finished off the ounce, and pulled out the trusty niddy-noddy. When wound, I had 114 wraps, to which I must apply some minor math (114 wraps * 58 inches in a wrap / 36 inches in a yard) and got... 180-ish yards. That's only 90 yards of 2-ply and the Yarn Harlot is pretty clear you need about 164 yards. I said some awful things to myself in my head and started debating options.

I could knit with the single. But I had spun this with the intention to ply and therefor it had a pretty reasonable twist in it (I like firmly plied yarns). So that's a bit iffy. I could spin silk and ply with that. But I didn't really want the shiny strand offsetting the deliciously soft and natural color. I could ply with the pygora I purchased, but really I wanted that in its own project.

So the next morning I bit the bullet and e-mailed Lois to see if she didn't (oh, please!) have just one more ounce of this luscious blend that I could somehow purchase and have sent to me?

Well, YES! Lois replied a mere two hours later (and at a much more reasonable hour than the 5 A.M. I was forced to be awake that morning). In fact, she told me, "I have a pound, if you'd like it.".

Well, yes, I would. But I only need one more ounce, and one more ounce is what I asked to be sent. I have pounds of other things that still need to be spun without adding to it!

But boy.. it was tempting.

If you're tempted, you should write her! (Her contact information is on their website at www.bellwetherwool.com). Really. You should. You know you want some, too!

Phat Fiber Box Wrap-up - September 2009

Phat Fiber Sample box - September 2009
Originally uploaded by Project Pictures

Well, we're all done with Phat Fiber and there's nothing left to discuss... or is there?

Here's a line-up of all the yarn I spun from the samples. There is milk, linen, domestic wool, bamboo, Merino, Wensleydale, Shetland, alpaca, sparkle and who knows what else. They were prepared as commercial top and carded batts in braids, coils, twists and poofs. Most of my spun samples are 2-ply, but there is one 3-ply in there, and one single.

I have them lined up in a row because I'm considering knitting them for a project in this order. The single, and the linen, are off to the side because they simply don't blend in with the rest of the yarn. They are lovely in their own right and might become a beaded bracelet or something else that is fun. When totaling the skeins I have picked out to use, there is just over 460 yards. I've already designed a project and will probably knit it sometime this month. We'll see.

Because I'm a bit of a numbers girl, I can't help but sit down and figure out what exactly I paid to get.
If we total what everyone included we have:
5.2 + 6.8 + 2.5 + 6 + 7.8 + 9.9 + 5.4 + 12.2 + 8.9 + 7.4 + 9 + 10.2 + 5.5 + 14 + 6.6 + 28 = 145.4 g or 5.1 ounces. Those that sent in larger samples seem to have outweighed those that didn't. (Otherwise 16 samples at 1/4 ounce each should be 4 ounces).
The box was $33 so it comes out to about $6.60 per ounce. That's a little steep compared to what I can buy a carded batt for on Etsy if all we are looking at here is fiber but that doesn't take into account the discount coupons and little extras that were put in the package as well, nor the variety and other intangibles that came in this box.

Considering how many different and wonderful things I got to try and how many new shops I got to try out through this sampler, it was worth every penny.

Into the Whirled - Phat Fiber Sample

Into the Whirled - Phat Fiber Sample
Originally uploaded by Project Pictures

It was with some sadness that I picked up the final sample from the September 2009 Phat Fiber box. It had been a fun ride and had its ups and downs, but I was going to miss getting to go to my big box and pull out something random! (This is not entirely true, as I have plenty of other random stuff to spin.. just not quite THIS random!)

But I saved the "best" for last. I will admit that many other fibers in this box wowed me, but this sample from Into the Whirled had me drooling from the start. Fine merino at its best, it had been dyed into a lovely colorway named "Minotaur" in honor of the September theme. Cris did a great job.

Not only that, but every single contributor to Phat Fiber ought to take a look at the labeling on this sample. First off, she sent a full 1/2 ounce. That's way above and beyond the requirements. I do wonder if I somehow got a "bonus sample" but we'll at least give her full credit for more than 1/4 ounce, right? On top of that her fiber is VERY CLEARLY LABLED. It has full fiber content (admittedly not a mix, but still there were some with no information at all). It has the colorway and dyelot. It has the weight right there. In addition the back of the tag tied to the braid has space for all of this information to be re-written AND space for WPI, yardage and other spinning notes.

The colors were rich and evocative of the name. On top of that they're very fall-appropriate and I liked them, so she really hit the nail right on the head. The combed top spun just like I would like Merino to do--smoothly, easily and evenly, with no felted clumps or obvious neps.

I was able to make a full 75 yards of 2-ply yarn from this sample. The colors stripe through each other in a pleasing fashion, never clashing. It's really a very pretty yarn and a perfect finish for my box!

Woolen Mill St Yarns - Phat Fiber Sample

Woolen Mill St Yarns - Phat Fiber Sample
Originally uploaded by Project Pictures

Oh, merino, how do I love thee? Let me count the ways.

I love your soft hand, your well-defined crimp. I love the creamy rich colors you dye into. I love that you spin smoothly and easily into very fine singles, and yet plump back up with gorgeous loft. I love how you get sucked into the whirlpool of long-draw and just dream your way into yarn...

Yes, I do love merino. And really what's not to love? Of course this is straight up yummy superfine merino top and it is the best of the best. It is good to remember that this fiber will felt. So hand-wash only and be gentle!

There's not much to go into with spinning merino. I will say that this top lived up to its name of "superfine". There were no slubby bits or short cuts that jumped out at me. It drafted smoothly, evenly, and exactly as I would expect of a premium product. Called "Orcs and Goblins", the color was rich in shades of gray, tan, and a lovely clay red which made me think of the Lord of the Rings. I was able to spin 35+ yards of 2-ply lace from 6.6 grams.

FarmGirlChic - Phat Fiber Sample

FarmGirlChic - Phat Fiber Sample
Originally uploaded by Project Pictures

Well, my friends, we're nearing the end of my samples, and what a lot of fun I've had! Today brings us the only "un-prepped" fiber in the box, a bag of lovely locks of border leicester wool dyed blue, and undyed yearling mohair. Open up this bag and you get a solid handful of curly bits of fiber tumbling everywhere. The mohair has a brilliant shine and the border leicester is dyed to a gorgeous deep blue. So it's not really a surprise that Farm Girl Chic has named it "Little Boy Blue".

You can spin right from locks if you have some way to open them up. Luckily, I do own a couple of dog brushes from the time I spun locks for a Spindler's Group Challenge. So I considered spinning these straight up into a strand of blue and a strand of white. But even more appealing to me was the idea of blending them together. The white mohair would mute the deeper navy blue, and also give the yarn a beautiful halo.

I started by sorting the mohair from the wool, and then pulled out each lock and combed it using my dog brush (much like a flick-carder, but at $3.99 for a set with it and pointy-toothed comb, it's much more budget-conscious than finding a flick-carder). This opens up the fibers so you can draft them from each other. I also sorted the longer locks from the shorter ones and placed everything in a pile. I also had a separate pile of the fluff that stayed caught in the brush.

At this point I still could have spun the two parts into individual singles. In fact if I kept the longer bits from the shorter, I could have spun the border leicester into something very close to true worsted yarn. But as I mentioned, that wasn't my goal.

Instead I got out my hand-cards once again. I felt pretty confident with my recent attempts at their use. I loaded them up with bits of both the wool and mohair and carded four batts. I stacked these up on top of each other, and split them four ways (so that each batt was included in the new clump) and re-carded that fiber again. The batts were a little thin, so I divided them again but three ways and blended one last time.

Now I had three batts of beautifully blended cornflower blue. The mohair softened out the border leicester and gave it a silky hand in the batt. I spun each one from the tips but using a long-draw for a semi-worsted yarn, and doubled it back on itself for a two-ply. Then I wound the yarn over my hand and got out my pedicure brush. The fun thing about mohair is if you brush the yarn gently the halo will pop right up.

This was a lovely sample. I'm not sure what people would do with it if they didn't have preparation tools available. A generous 14 gram sample means I have about a half-ounce of finished yarn that spun into 29 yards of 2-ply, fluffy goodness!

Wildthyme - Phat Fiber Sample

Wildthyme - Phat Fiber Sample
Originally uploaded by Project Pictures

There's no story included with this sample, nor a name that would invoke one. But wrapped up in pretty pink tulle was a pea of fiber fit to go under a princess's bed.

In fact, this sample was such a perfect example of green I found I couldn't photograph it like I did everything else from the Phat Fiber Box. The backdrop of my lawn made the green wool completely disappear.

The blend on the card says wool and mohair, but how much and what sort exactly I'm not certain. It spun like merino and I didn't really notice any mohair blended in while spinning but that doesn't mean it wasn't in there!

The fiber is wrapped very tightly in a ball and the strip is very thin. It was interesting to hold in my hand as I was drafting. I had a little trouble managing the delicate strip, but not too much. I loved the crimp of the fiber and it spun into a lovely single. There is just enough variation in the green to make it interesting.

Sheepy Kitty - Phat Fiber Sample

Sheepy Kitty - Phat Fiber Sample
Originally uploaded by Project Pictures

When I get a fiber I really like, I find it particularly annoying when it isn't labeled! Sheepy Kitty provided this perfect pink twist of combed top, but I have no idea what sort of wool it is. I'd venture BFL or Corridale. (Thank you Naomi! It's BFL. Silly me I tossed the bag and didn't check it for labeling, which is entirely my fault and not yours!) It's a medium-staple wool (longer than merino, but no where near as long as those delicious Wendleydale samples!). It's not particularly soft, nor particularly rough. In short, it's pretty much impossible to identify.

I liked it. I liked it a lot. I liked the color, the staple and the preparation. I liked that she gave us 10.2g to work with. I liked the adorable little twist it was pulled into. I liked the cute little story about her kitty Kilala on her blog. In short, this was perfect--except for not knowing what the heck it was!

It spun very smoothly with a great feel in my hands. It was easy to draft, easy to control, took a nice amount of twist and plied well. Not much more you can ask for there. I'd say this is a strong workhorse wool and would do wonderfully in mittens, or spun up for a jacket or cardigan.

Corgi Hill Farm - Phat Fiber Sample

Corgi Hill Farm - Phat Fiber Sample
Originally uploaded by Project Pictures

Oh, how I loved this batt. It was the first to really catch my eye when I pulled everything out of the box, so of course I saved it to spin later on down the line. Named "Pixie Farts" it is a blend of merino and alpaca, with a little bit of firestar added for glitz. Gotta love sparkly wool (I know my daughter does!).

This is the first sample where I had something in mind for it before I started to spin. I recently finished an AbbyBatt by a similar name (Fairy Farts). I'd like to knit the resulting yarn into fingerless mitts. Because I like my mitts a little longer, and because of the similar names, I figured this could make a lovely complimentary cuff at the wrist and knuckles. So I spun with the intention of matching the two yarns.

That meant I needed a two-ply yarn that was a bit fluffier than the laceweight I had been spinning so far. I aimed for a single that looked like it was a little less than half of normal fingering weight. This is because once you ply it, the single will fluff back up a bit.

I was reminded as I spun of something I had read lately. Unfortunately I can't remember exactly where I saw it, but someone mentioned that batts have a tendency to spin up darker than they look. This is because in batt form, all that fiber is fluffed up with a lot of air in between and it reflects more light. Once you spin it you re-compact the fibers and bring them closer together giving more intense colors again. This was certainly true here! What were barely echoes of color in the batt became pronounced stripes in some parts of the yarn. It's a really pretty effect!

Twenty yards may not be enough to do cuffs on both ends of both mitts, but I still may incorporate this into my project. It's that, or this mini-skein may take up a semi-permanent spot in my fiber-shelf bouquet of favorite yarns!

Banana Migraine Designs - Phat Fiber Sample

Banana Migraine Designs - Phat Fiber Sample
Originally uploaded by Project Pictures

Banana Migraine Designs -- how can you not love a name like that? This little batt is 100% superwash wool. One thing you should know about superwash, if you think merino wants to be spun fine and silk is slippery, superwash blows both out of the water. Because it has been processed (either coated or stripped of its scales that would cause the fiber to felt) there isn't anything left for the fibers to grab onto one another.

I decided to go for a three-ply rather than two-ply with superwash. It's great for a sock yarn. I split the batt right off into three equal sections. One section was entirely blue/green. One was almost entirely pink, and the third was a mix of both. With each ply containing the blue/green color, I thought it would dominate. But as I spun it blended into a lovely purple!

The three-ply is almost thin enough to still be lace-weight. It's certainly on the lighter end of fingering. I'll also have to keep in mind that as the only superwash offering with this sample-box, I'll not want to combine it into any project I plan on felting!

Beesybee Fibers - Phat Fiber Sample

Beesybee Fibers - Phat Fiber Sample
Originally uploaded by Project Pictures

This beautiful sample is commercially processed top from Beesybee Fibers. It is a merino/bamboo blend. Because merino is protein fiber, and bamboo is cellulose, only the wool has taken the dye in this case. The bamboo is blended throughout and stands out visibly as silken white fiber. It gives the very soft merino a beautiful sheen. The strip of roving is mostly white but has a long section of soft green and a bit of an under-saturated navy blue as well.

8.9g were provided in the sample which gets a thumbs up from me on my "did you send at least 1/4 ounce" scale. I was pleased with the clearly printed business card, but would have liked percentages on the mix of merino to bamboo.

It spun as wonderfully as I would expect a merino/bamboo blend to do. It is a very smooth blend and does well being spun into fine singles with high twist. I was able to make just over 40 yards of 2-ply in a nice lace-weight yarn.

Blue Mountain Handcrafts - Phat Fiber Sample

Blue Mountain Handcrafts - Phat Fiber Sample
Originally uploaded by Project Pictures

Now here is a sample I can fall in love with. A carded mix of domestic wool, firestar, fine merino and some extra sparkle, it's just a whole bunch of fun. Blue and green are the dominant colors of "The Frog Prince" but there's a strip of orange running through it as well. Blue Mountain Handcrafts gets extra kudos for very clearly labeling the contents of the batt and sending MORE fiber than was labeled. The batt is marked at 10g, but it measured out at 12.2g.

This is not what I would usually spin. I would call this sort of thing an "art batt". The crazy colors cause for some interesting play, but more than that there are nubs of fiber that don't spin in evenly. What distinguishes this from my disappointment with the After the Sheep batt is that merino/bamboo ought to spin smoothly. A more esoteric blend like this is suited to neps and nubs all over the place.

Because they were so generous with the sample I was able to play with it a little bit. I attempted to spin the first sample as a loosely-spun single. My attempt came out with quite a bit of thick-and-thin. I'm just not that accustomed to evenly spinning with long-draw and the batt itself stuck together in places.

To combat this, I tried re-carding part of the batt with my Ashford student hand-cards. I carefully carded all the colors together, blending them well. This spun much more evenly, but still was marked with small nubs throughout.

Finally I took the last of the batt and spun a two-ply directly from the last section of roving. Like the single, the colors shine out of this sample quite clearly, but because it is plied on itself there is some chromatic blending.

After the Sheep - Phat Fiber Sample

After the Sheep - Phat Fiber Sample
Originally uploaded by Project Pictures

A beautifully blended sample of a carded batt was included in the September Phat Fiber box by After the Sheep. The intense colors of blue jumped out immediately. The fiber content is 70% merino and 30% bamboo--an interesting blend for such a vibrant sample. The bamboo and wool would have needed to be dyed separately. As a cellulose fiber, bamboo requires a fiber-reactive dye and caustic but the protein fibers of wool need acid dyes. Since each process won't dye the opposite fiber, you either end up with something with white streaks in it (because the dye didn't take on one of the fibers) or you do the whole thing twice. Doing them separately means you don't risk damaging the other fiber in an environment it doesn't like.

So I'm guessing that the bamboo and wool were dyed on their own, and then carded together. The bamboo glows with the sheen of silk and really brings out the darker variations in the wool.

I was really looking forward to the yarn this would make until I started spinning. For merino, this batt was a disappointment. There were lots of little bits that didn't want to draft well despite having been carded. There was also evidence of a fair amount of second cuts (little bits of fiber not as long as the rest). These are nice for "art yarn", but when you're trying to spin an even single they make funny little lumps that don't fit in with the rest.

I'm enamored with the colors, but not in love with this blend.

Infinity Yarn and Fiber - Phat Fiber Sample

Infinity Yarn and Fiber - Phat Fiber Sample
Originally uploaded by Project Pictures

Wensleydale, part two!

This beautiful braid is Wensleydale wool again, but this time in a combed-top preparation rather than a carded batt. (For those not in the know, a combed prep. of fiber aligns all the filaments parallel and usually sorts the long strands and discards the shorter ones, while a carded prep. jumbles everything together every which way. For true worsted spinning you need combed fibers. For true woolen spinning you need carded. But thankfully there are a lot of in-betweens in these two extremes).

Infinity Yarn and Fiber dyed this wool and named it "Murky". I'm betting there's a story there, but I'm not sure exactly what! I still was thrilled to get to spin Wensleydale again.

Like the MCMercantile sample, the staple seems to be about twelve inches long. This fiber, tho, seems even more glossy than the previous batt. That could be because it is combed and everything lying flat together picks up the light more than a jumbled batt. It could be a natural variation between two sheep. Both fibers were beautiful. Murky has a hint of brown in it near the creamy section, but the rest are subtle shades of aqua blue.

Spinning this was even easier than the carded batt. The combed top is (in my opinion) a better choice for this fiber. The strands slipped smoothly past each other and locked into place with the twist. The luster of the fiber clearly showed through and even though it is much more wiry and firm than Merino wool, its smoothness gives it a silky hand once spun.

I love this fiber, and if I were to start spinning hard-wearing items, I'd highly consider buying a whole lot more.